How To Replace A Door Shoe

- May 22, 2018-

photobank (2)_副本.jpg

This is our Alibaba website:      Welcome !

door shoe is a simple device attached to the bottom of a door. Is it effective in sealing the gap at the bottom of the door to prevent heat loss. Below are the materials that you need along with the instructions on how to replace a door shoe.

Step 1-Mark the Door

Open the door and set the door shoe at the lower portion of the door. Close the door slightly until the door and the door shoe press against each other. Using a pencil, mark the position of the door show. Trace a line to each end of the door shoe. This mark will also serve as your trimming guide.

Step 2-Remove the Door

Using a screwdriver,  remove the door from  its hinges. Lay the door on your working bench with the marks you made on step one on the upside.

Step 3-Saw Off

Using a circular saw with a crosscut blade, cut the lower portion of the door using the guide line you made on step one. Smooth the edges of the newly cut door portion using a sandpaper to remove wood splinters .

Step 4-Attach the Door Shoe

Attach the door shoe to the lower portion of the door and secure the door shoe with screws. Re-install the door and secure the hinges with screws.

Step 5- Test the Door

Open and close the door and check for if there are no gaps between the door shoe and the bottom portion of the door. Do any adjustments by repeating steps one to four.

This is our Alibaba website:      Welcome !